IPIO Datasheet

IPIO

This is a draft

Communications
Interface	Ethernet
LAN	1-port 10/100Base-T(X)
Channels
Input	4 Digital
Input type	Voltage-driven digital input
Input interface	Optocoupler-based input stage
Optocoupler component isolation	5 kVrms input-to-output isolation for 1 minute
Output	8 Digital
Output type	Solid-state sourcing voltage output
Output voltage	Tracks the applied field supply voltage
Recommended application range	12-24 VDC systems
Protected continuous output current	Up to 200 mA per channel
Output device class	G3VM-61D1 type SSR, 60 V load voltage, 500 mA element rating
Pulse interval	Firmware configurable
Derived pulse timing capability	SSR tON = 0.8 ms typ / 2.0 ms max, tOFF = 0.1 ms typ / 0.5 ms max
Recommended pulse rate	Conservative publication candidate <= 200 Hz for low-frequency signaling
Application note	Outputs are voltage outputs, not dry contacts. Use an external relay if dry-contact behavior or higher-power switching is required.
Power
Input	12-24VDC
Derived input current @ 12 VDC	Approximately 70 to 100 mA, excluding external output loads
Derived input current @ 24 VDC	Approximately 35 to 50 mA, excluding external output loads
Additional current per asserted DI	Approximately 2.8 mA @ 12 VDC, 5.8 mA @ 24 VDC when driven from the module supply domain
Connectors
Input	1x4 plug-in screw terminal block
Output	1x8 plug-in screw terminal block
Power	1x2 plug-in screw terminal block
Terminal pitch	3.5 mm
Leds
Output	8 blue
Input	4 blue
System	1- 2-Emergency
Software
Connection	TCP
Interface	IPIO Manager
UAC	Username/Password
General
Dimensions	110x83x30 mm (without rail adaptor)
Weight	202 g
Package	Cardboard box (13x18x8 cm)
Mounting	DIN-Rail mount
Certification	CE, Rohs