View source for IPIO Datasheet

[[File:IPIO.png|thumb|IPIO]]
This is a draft
{| class="wikitable"
|+
!
!
|-
| colspan="2" |'''Communications''' 
|-
|Interface
|Ethernet
|-
|LAN
|1-port 10/100Base-T(X)
|-
| colspan="2" |'''Channels'''
|-
|Input
|4 Digital
|-
|Input type
|Voltage-driven digital input
|-
|Input interface
|Optocoupler-based input stage
|-
|Optocoupler component isolation
|5 kVrms input-to-output isolation for 1 minute
|-
|Output
|8 Digital
|-
|Output type
|Solid-state sourcing voltage output
|-
|Output voltage
|Tracks the applied field supply voltage
|-
|Recommended application range
|12-24 VDC systems
|-
|Protected continuous output current
|Up to 200 mA per channel
|-
|Output device class
|G3VM-61D1 type SSR, 60 V load voltage, 500 mA element rating
|-
|Dry Contact
|
|-
|Wet Contact
|
|-
|Pulse interval
|Firmware configurable
|-
|Derived pulse timing capability
|SSR tON = 0.8 ms typ / 2.0 ms max, tOFF = 0.1 ms typ / 0.5 ms max
|-
|Recommended pulse rate
|Conservative publication candidate <= 200 Hz for low-frequency signaling
|-
|Application note
|Outputs are voltage outputs, not dry contacts. Use an external relay if dry-contact behavior or higher-power switching is required.
|-
| colspan="2" |'''Power'''
|-
|Input
|12-24VDC
|-
|Derived input current @ 12 VDC 
|Approximately 70 to 100 mA, excluding external output loads
|-
|Derived input current @ 24 VDC
|Approximately 35 to 50 mA, excluding external output loads
|-
|Additional current per asserted DI 
|Approximately 2.8 mA @ 12 VDC, 5.8 mA @ 24 VDC when driven from the module supply domain
|-
| colspan="2" |'''Connectors'''
|-
|Input
|1x4 plug-in screw terminal block
|-
|Output
|1x8 plug-in screw terminal block
|-
|Power
|1x2 plug-in screw terminal block
|-
|Terminal pitch
|3.5 mm
|-
| colspan="2" |'''Leds'''
|-
|Output
|8 blue
|-
|Input
|4 blue
|-
|System
|1-
2-Emergency
|-
| colspan="2" |'''Software'''
|-
|Connection
|TCP
|-
|Interface
|IPIO Manager
|-
|UAC
|Username/Password <ref>IPIO has 2 default users defined, one for VIS access and one for administration.</ref>
|-
| colspan="2" |'''General'''
|-
|Dimensions
|110x83x30 mm (without rail adaptor)
|-
|Weight
|202 g
|-
|Package
|Cardboard box (13x18x8 cm)
|-
|Mounting
|DIN-Rail mount
|-
|Certification
|CE, Rohs
|}
[[Category:IPIO]]
==Notes==
<references />